Instromet, Inc. Questionnaire for estimate of ultrasonic noise produced by control valves & meter sizing --  US version.

 

For calculating the production of noise please supply us with the following information:

General: Customer:
Site:

US flowmeter:

 Make:
Type:
Diameter: in
Valve: Make:
Type:
Diameter: in

 

Installation:  Drawing (or sketch) of the installation in which the presence of the following piping elements can be seen (indicate number of each in space provided, or furnish sketch): 

Turbine meter

  45 degree bends

Elbows

  Reducer/expander

Out of plane bends

  Distance valve <> US flowmeter

  Blind Tees

  Other attenuating elements

  US Flowmeter up or downstream of valve?
Process Conditions:
max mscfh: min mscfh: nominal mscfh:
Flow
max psig: min psig: nominal psig:
Pressure Cut
Static Pressure before valve:
Static Pressure   after valve:

Thank you for supplying us with the above mentioned information.  With this information we can predict the functionality of our ultrasonic flowmeter for your specific application.